Setup sonicwall onsip password#
Setup sonicwall onsip series#

PPTP, if your ISP provided you with a server IP address, a user name, and password.ġ6.Select one of the following options and go to the corresponding section:ġ7.Enter the public IP address provided by your ISP in the SonicWALL WAN IP Address, then fill in the rest of the fields: WAN Subnet Mask, WAN Gateway (Router) Address, and DNS Server Addresses.

PPPoE, if your ISP provided you with client software, a user name, and a password.

DHCP, if your ISP automatically assigns you a dynamic IP address.

Static IP, if your ISP assigns you a specific IP address or group of addresses.

Click the hyperlinks for definitions of the networking terms. Click Next.ġ5.Confirm that you have the proper network information necessary to configure the SonicWALL to access the Internet. Note: If you choose to use the modem as your primary connection, the Setup Wizard will not ask you to configure the WAN interface.ġ3.If you chose to use the modem, enter the Dial-up Connection informationġ4.Enter the dial-up Phone Number, User Name, and Password.

Setup sonicwall onsip series#

If you chose to use the 3G, enter the Country, Service Provider, and Plan Type information for the 3G device.ġ1.If you are setting up a SonicWALL TZ series appliance that supports analog modem devices for dial-up WAN connection, select how you will use the modem. – Yes, 3G is my only connection to the Internet.ĩ. – Yes, I will use 3G as a backup for the WAN Ethernet connection. If you are setting up a SonicWALL TZ series appliance that supports 3G devices for Wireless WAN connection over cellular networks, select how you will use the 3G device. If you are setting up a SonicWALL TZ series appliance that supports 3G devices for Wireless WAN connection over cellular networks, or supports analog modem devices for dial-up WAN connection, select the type of device:ħ. The SonicWALL’s internal clock is set automatically by a Network Time Server on the Internet. Select the appropriate Time Zone from the Time Zone menu.

Setup sonicwall onsip password#

Tip It is very important to choose a password which cannot be easily guessed by others.ĥ. To set the password, enter a new password in the New Password and Confirm New Password fields. When selecting this mode, the wizard will skip over the steps for configuring the LAN interface.Ĥ. Secure or Open Access Point - Add secure wireless access to an existing wired network.Office Gateway - Provide secure access for my wired and wireless users.On a SonicWALL TZ series (wired or wireless) appliance, select the appropriate deployment scenario for your network and then click Next: In the Welcome screen, select the Setup Wizard and then click Next.ģ. Click the Wizard button on the top right corner of the SonicOS management interface.Ģ. This information is obtained from your ISP.ġ. Tip Be sure to have your network information including your WAN IP address, subnet mask, and DNS settings ready. If you are assigned a single IP address by your ISP, follow the instructions below. This section describes configuring the SonicWALL appliance in the NAT mode. The actual IP addresses of computers on the LAN are hidden from outside view. As a form of packet filtering for firewalls, it protects a network from outside intrusion from hackers by replacing the internal (LAN) IP address on packets passing through a SonicWALL with a “fake” one from a fixed pool of addresses. If you do not have enough individual IP addresses for all computers on your network, you can use NAT for your network configuration.Įssentially, NAT translates the IP addresses in one network into those for a different network. NAT also allows you to conceal the addressing scheme of your network.

It is a way to conserve IP addresses available from the pool of IPv4 addresses for the Internet. Using NAT to set up your SonicWALL eliminates the need for public IP addresses for all computers on your LAN. Wireless LAN network configuration (wireless devices)Ĭonfiguring a Static IP Address with NAT Enabled.3G or Analog Modem configuration (SonicWALL TZ series).WAN networking mode and WAN network configuration.The Setup Wizard helps you configure the following settings: Tip You can also configure all your WAN and network settings on the Network > Settings page of the SonicWALL Management Interface To launch the Setup Wizard at any time from the management interface, click the Wizards button in the top right corner, and select Setup Wizard. The first time you log into your SonicWALL appliance, the Setup Wizard is launched automatically.